High-refresh rate phones are norms in 2020, and low budget or mid-range phones are getting higher refresh rates these days. Oppo unveiled the Oppo A33 on September 28th, and it is specifically for people looking for a high refresh rate phone on a budget. The device came out of the box with Android 10 under ColorOS 7.2 UI.
In this guide, we will show you the real image of the UFS ISP pinout and test point for the Oppo A33 2020 CPH2137. By using the ISP PinOUT, you can easily restore the stock ROM, bypass FRP lock, or reset user data on your device via Z3X EasyJTag Box Tool.
What is ISP PinOUT?
ISP or In-system programming also known as in-circuit serial programming (ICSP) for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile, computer. You will find the IS Pinout connection on the logic board of your device. Therefore, you will need to remove the back panel of the handset and follow the below image to locate the pinout.
Also Read
Oppo A33 2020 (CPH2137) UFS ISP Pinout Image:
I hope this guide was helpful to find the Oppo A33 2020 CPH2137 UFS ISP Pinout Testpoint.
Oppo A33 2020 Specifications:
The Oppo A33 features a 6.5-inch IPS LCD panel with a 90 Hz refresh rate. The resolution is on the lower side with 720 x 1600 pixels on a screen with an aspect ratio of 20:9. The screen is protected by Corning’s Gorilla Glass 3. Inside the device, we get the Qualcomm Snapdragon 460, an entry-level processor from Qualcomm built on an 11nm manufacturing process. It is an octa-core processor with four Kryo 240 cores clocked at 1.8 GHz and four Kryo 240 cores clocked at 1.6 GHz. For graphics-intensive tasks, we have the Adreno 610 GPU.
The phone comes with Android 10 out of the box with ColorOS 7.2 running on top of it. There are two storage and RAM variants of this smartphone: 3GB + 32GB and 4GB + 32GB. The internal storage is slightly on the lower side, but there is a slot for storage expansion via a MicroSD slot. There is a triple-lens setup at the back and a single camera at the front in optics. At the rear, we have a 13MP primary sensor with an f/2.2 lens, a 2MP macro sensor with an f/2.4 lens, and a 2MP depth sensor with an f/2.4 lens. The selfie camera is a single 8MP sensor paired with an f/2.0 lens.
In terms of connectivity, we have Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, and USB Type-C 2.0. We have the basics for sensors, consisting of an accelerometer, proximity, compass, and rear-mounted fingerprint sensor. There is a 5,000 mAh battery inside the A33 powering everything, which supports 18W of fast charging. It is available in two color options: Moonlight Black and Mint Cream.
