The OPPO F11 Pro is a budget mid-range smartphone by the Chinese OEM OPPO. It offers a FullView notch-less display with a 19.5:9 aspect ratio and more than 84% screen-to-body ratio as well. Though the handset packs an LTPS IPS LCD Full-HD display, the device looks quite premium and delivers great viewing quality.

In this guide, we will show you the real image of the ISP pinout and test point for the Oppo F11 Pro CPH1969. By using the ISP PinOUT, you can easily restore the stock ROM, bypass FRP lock, or reset user data on your device via UFi Box. In this guide, we will also guide you on how to reboot into 9008 EDL Mode.

What is ISP PinOUT?

ISP or In-system programming also known as in-circuit serial programming (ICSP) for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile, computer. You will find the IS Pinout connection on the logic board of your device. Therefore, you will need to remove the back panel of the handset and follow the below image to locate the pinout.

Oppo F11 Pro CPH1969 ISP Pinout Image:

How to Enter EDL Mode on Oppo F11 Pro (CPH1969)

Follow this instruction carefully to boot your device into EDL Mode (aka Emergency DownLoad Mode)

Method 1: Using ADB

  • Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
  • Connect your device to your PC
  • Open the adb command and enter the command
  • .\adb reboot edl

Method 2: Using Fastboot

  • Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
  • Boot your device into the bootloader
  • Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
  • now enter the command
  • .\fastboot oem edl

Method 3: By Hardware Test Points / Restore Your device

  • Download the QDLoader driver
  • Find the EDL PinOUT/Test Point on your device (refer image above to find the test point)
  • To enter EDL mode, you need to use a metal tweezer or a conductive metal wire to short the points.
  • Once you are done, connect your device to the PC using a USB cable
  • This way, your device will enter EDL mode. Now you can open the QFil or QPST Tool to flash the firmware and restore your device.

I hope this guide was helpful to find the Oppo F11 Pro CPH1969 ISP Testpoints.

What is EDL Mode? How to Enter EDL Mode on Any Qualcomm Device

.\adb reboot edl

.\fastboot oem edl

Oppo F11 Pro Specifications

The Oppo F11 Pro handset was launched in March 2019. It came with a 6.53-inches LTPS IPS LCD display with a 1080×2340 pixel resolution. It’s powered by the octa-core MediaTek Helio P70 SoC, coupled with Mali-G72 MP3. The device has 4GB/6GB RAM and 64GB/128GB of internal storage option (expandable up to 256GB MicroSD card via hybrid slot). It runs on Android 9.0 Pie on top of ColorOS 6 UI.

The handset sports a dual rear camera setup of a primary 48MP (wide, f/1.8) + a secondary 5MP (f/2.4, depth sensor) camera with PDAF, an LED flash, HDR, Panorama, etc. It has a 16MP pop-up selfie camera (wide, f/2.0) with HDR, Portrait, AI Face Unlock support. The phone has a 4,000mAh battery with 20W fast charging (VOOC 3.0) support.

In terms of the connectivity option, it has a 3.5mm audio jack, Dual-Band Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, GPS, A-GPS, GLONASS, FM Radio, Micro USB 2.0, USB OTG, etc. While there are a couple of sensors available on this device. Such as a rear-mounted fingerprint sensor, an accelerometer, proximity, ambient light, and compass sensor.